MAXCLEAR® INJECTION is a solvent-free liquid resin based on siloxanes which once diluted in water it is converted into a water-repellent microemulsion, to provide a highly effective horizontal barrier against rising damp in masonry.

MAXEPOX® INJECTION is an epoxy formulation of very low viscosity, for pouring or injecting under pressure and curing at ambient temperature.

MAXEPOX® INJECTION –R is an epoxy formulation of very low viscosity, for pouring or injecting under pressure and curing at low temperatures.

MAXFIX® -E is a two component, methacrylate free, epoxy resin-based system, packed in a cartridge for use by injection means. It can be used on concrete, solid brick and stone. Application of the resin is made in an easy and quick way by a hand gun.

MAXFIX® -V is a solvent-free, vinyl ester-based resin which is packed in two-part biaxial type cartridge. It is specially designed for use by injection means. It is suitable for any solid or hollow base materials. Applications can be made easy and quick way by a chemical anchor caulking gun.

MAXGROUT® INJECTION is a single component cement-based mortar with very fine mineral fillers. Once mixed with water, it is specially designed to be used for injection or grouting for filling of cavities in masonry walls and consolidating works.

MAXINJECTION® 12 is an ultra-fine cement being the maximum size of grain equivalent to 12 microns. Slurries prepared with MAXINJECTION® 12 ,with a small addition of MAXINJECTION® 12 LIQUID superplasticiser, will show a very high penetration which exceeds those that can be obtained with conventional cement/bentonite slurries.

MAXURETHANE® FOAM is a two component, CFC free product. A component is a polyisocianate MDI type and B component is a pre-formulated polyol.

When injected with the proper equipment at 1:1 mixing ratio, their reaction will provide a foam as a result which fills cavities and hollows in the ground.

MAXURETHANE® INJECTION is a two-component, 100% solid and solvent-free polyurethane-based injection resin which reacts quickly with water to produce an expanding foam with a semi rigid and homogeneous closed cell porous structure which has excellent waterproofing properties and strong bonding seal.

MAXURETHANE® INJECTION is a water reactive, non hydrophilic but hydrophobic resin type, thus the resulting foam does not absorb water and will not be affected by water dryness: it will not shrink or swell. The gel time of the product is adjustable by adding a certain percentage of MAXURETHANE® INJECTION CAT accelerator.

MAXURETHANE® INJECTION CLEANER is a special agent for flushing and cleaning of DRIZORO® injection resins formulated with water-reactive polyurethane-based resins.

MAXURETHANE® INJECTION FLEX is one-component, 100% solid and solvent-free polyurethane-based injection resin which reacts quickly with water to produce an expanding foam with a flexible and homogeneous closed cell porous structure which has excellent waterproofing properties and strong bonding seal.
MAXURETHANE® INJECTION FLEX is a water reactive, non hydrophilic but hydrophobic resin type, thus the resulting foam does not absorb water and will not be affected by water dryness: it will not shrink or swell.
The gel time of the product is adjustable by adding a certain percentage of MAXURETHANE® INJECTION FLEXCAT accelerator.

MAXURETHANE® INJECTION-LV (MI-LV) is a two-component, 100% solids and solvent-free, polyurethane-based injection resin of high quality and very low viscosity which upon contact with water (5% by weight) leads an homogeneous closed cell porous structure. Thus, the resulting material has excellent waterproofing properties and high elasticity.

MAXURETHANE® INJECTION -LV CLEANER is a special agent for flushing and cleaning of DRIZORO® injection resins formulated with low viscosity polyurethane-based resins.

MAXURETHANE® INJECTION MONO is one-component, 100% solids, and solvent-free polyurethane-based injection resin which reacts quickly with water to produce an expanding foam with a semi rigid and homogeneous closed cell porous structure which has excellent waterproofing properties and strong bonding seal.
MAXURETHANE® INJECTION MONO is a water reactive, non hydrophilic but hydrophobic resin type, thus the resulting foam does not absorb water and will not be affected by water dryness: it will not shrink or swell.
The gel time of the product is adjustable by adding a certain percentage of MAXURETHANE

MAXURETHANE® INJECTION TUBE (MI TUBE) is a system consisted of a non swelling, flexible and injectable PVC tube provided with small and longitudinal openings which have been designed to act as one-way valves in order to prevent concrete entering, and plugging the tube during concreting but allow resin flow into constructions joints. These lateral openings ensure a uniform discharge of the injection resin. Tube is placed on top and in the centre of the any joint formed for a slab or wall during the concrete pouring process.

MI TUBE system combined with MAXURETHANE® INJECTION-LV (MI-LV) the polyurethane-based injection resin of low viscosity (Technical Bulletin N° 218) composes a flexible and reliable system that is used for sealing of construction and cold joints as well as of different construction elements to create a watertight concrete structures. During injection process, the MI-LV resin flows lengthwise along the injection tube and penetrates through the openings into the substrate, sealing and filling all porous, fissures, cracks, voids and concrete capillarity network around the tube area thereby sealing the structure.