MAXBETON® is a hydraulic, quick setting, non-shrink mortar for placing and fixing of elements in building and civil works. Its thixotropy allows the placing in both vertical and horizontal surfaces as well as overhead areas.

MAXEPOX® FIX is a three-component fluid mortar formulated with solvent-free epoxy resins and well-graded mineral products, that provides high mechanical properties and fluidity. It is specially designed for anchoring bolts and filling voids by pouring.

MAXEPOX® FIX meets the requirements of R4 Class according to EN-1504-3 and the requirements for rebars anchoring according to EN-1504-6.

MAXEPOX® W is a two-component solvent-free epoxy-based product, with medium viscosity and low reactivity, specially designed for restoration jobs in wood structures by filling forms and fixing of fiber-glass or metal reinforcement bars. Proposed system consists of removing the damaged wood area, and replace it by a new composite material composed of reinforcement elements embedded by the epoxy mortar, thus the mechanical properties are recovered.

MAXFIX® -P is a two component, polyester-based resin which is packed in two-part biaxial type cartridge. It is specially designed for use by injection means. It is suitable for any solid or hollow base materials. Applications can be made easy and quick way by a hand gun.

MAXFLOOR® MARINE is a two-component mortar composed of component A, water-based acrylic resin, and component B, cement-based mortar with special additives. Once mixed, it provides a non-slip mortar with high flexibility and adhesion, suitable for protection against corrosion and abrasion on metal surfaces.

MAXGRIP® is an one-component, quick-setting, shrinkage-compensated, fluid mortar formulated from special cements and selected additives and aggregates, which has been specially designed for use as rapid anchoring grout in placing and fixing of elements in horizontal concrete or masonry.

MAXGROUT® is a one-component non-shrink mortar formulated from special cements and well-graded mineral products which provides high mechanical properties and fluidity. Contains no chlorides or metal particles. It comes in powder form, ready to use mixing only with water. The product meets the requirements of R4 Class according to EN-1504-3 and the requirements for rebars anchoring according to EN 1504-6.

MAXGROUT®-HR is a one-component, non-shrink fluid mortar with high mechanical properties and formulated from special cements, well-graded mineral products and specials admixtures. It is a suitable product for fillings, anchorages and concrete repairs when a rapid return to service is required.

MAXMORTER® CAL is a mortar based on lime and inert aggregates with controlled size. It is specially designed for repair, pointing of joints and rendering of deteriorated stone and brick elements in masonry, for both interior and exterior applications.

MAXMORTER® EXPANSIVE is a high safety demolition mortar to demolish where dynamite is not an option. So, it is an essential, effective and definitive alternative to the use of conventional explosives, being not only safer, but in many cases much more economical.

When MAXMORTER® EXPANSIVE is mixed with water and poured into holes, it hardens and provides an expansive pressure on the hole walls which cracks the element to be demolished.

MAXMORTER® - F is a specially formulated concentrate, based on special cements and additives. that provides ideal properties for jobs which require quick putting into service of an element. The product can be used pure as supplied or it can be used as a concentrate, mixing it with sand (up to 3 parts of sand per each part of product), depending on the specific application.

MAXMORTER® HEAT 1100 is a refractory mortar made of special cements and aggregates which withstands a temperature up to 1100 ºC. It is designed for laying refractory bricks and coating of walls exposed to extreme conditions at high temperature or fire contact.

MAXMORTER® HEAT 1600 is a refractory mortar made of special cements and aggregates which withstands a temperature up to 1600 ºC. It is designed for laying refractory bricks and coating of walls exposed to extreme conditions at high temperature or fire contact.

MAXMORTER® HEAT 750 is a refractory mortar composed of special cements and aggregates which withstands a temperature up to 750 ºC. It is designed for laying refractory bricks and coating of walls exposed to extreme conditions at high temperature or fire contact.

MAXSTONE® is a two component, hydraulic setting, very light mortar, which acts as a mouldable continuous stone like mortar, to create or reproduce stone for interior or exterior applications.

Pre-mixed, macroporous one-component mortar composed of hydraulic binders, fibers and light aggregates with thermo-dehumidifying and soundabsorbing performance that forms a coating suitable for the treatment of substrates damaged by rising dampness.

THERMOSAN® - F is an one-component mortar composed of hydraulic binders for the decorative finish of the mortar coating against rising dampness THERMOSAN®.

WATMAT® is a product ready to use, prepared with special cements, silica sand and additives that allows to obtain a quick setting mortar for levelling newly constructed manholes and urgent repairs on concrete floors.

THERMOSAN® - F is an one-component mortar composed of hydraulic binders for the decorative finish of the mortar coating against rising dampness THERMOSAN®.